Neewer Heavy Duty Light Stand with Casters and Pro Boom Arm, Max. Height 14.7ft

Neewer Heavy Duty Light Stand with Casters and Pro Boom Arm, Max. Height 14.7ft

Neewer Heavy Duty Light Stand with Casters and Pro Boom Arm, Max. Height 14.7ft    Neewer Heavy Duty Light Stand with Casters and Pro Boom Arm, Max. Height 14.7ft

Neewer Heavy Duty Light Stand with. And Pro Boom Arm, Max. Height 14.7ft/4.5m, Stainless Steel Tripod Stand with 7.8ft/2.4m Crossbar and Sandbag for Reflector, Softbox, Monolight, Load Up to 40KG.
Note 1: This product is NOT Included any lighting equipment. Note 2: The counterweight sandbag is empty, you need to add weight by yourself.

Note 3: The crossbar cannot be used alone, it needs to be used with a tripod stand. Note 4: When fixing the stand in a certain position, it is recommended to activate the brake first to prevent the device from sliding by itself.

Note 5: When you rotate the angle adjustment dial which is set at the end of the boom arm, firstly you need to loosen the butterfly knob and keep the crossbar balanced, then you can adjust the angle of the head of the boom arm to avoid accidents and damage to photographic equipment. Equipped with an angle adjustment dial set at the end of the boom arm to help adjust angle of the light head, providing more convenience when in use. The tripod stand is equipped with buffer spring, which can reduce the impact of the sudden drop of the lighting equipment when adjusting the height, so as to protect the lighting equipment.
Come with a sandbag, which can balance the weight of the lighting equipment, protect their safety. With 3 universal roller wheels, the light stand can move around easily; Set with a foot brake to fix the tripod stand in its place, ensures the stand does not slide. Stand Height: 50.3-82.6 inches/128-210 centimeters. Maximum Height: 177.1 inches/450 centimeters. Crossbar Length: 52.7-93.7 inches/134-238 centimeters.

Load Capacity: 88.1 pounds/40 kilograms. 1 x Empty Counter-Weight Sandbag. 1 x 1/4 inch to 3/8 inch Screw. Pro Tripod Stand with Holding Arm: (1)Tripod Stand; (1)Crossbar; (1)Empty Sandbag; (1)1/4 inch to 3/8 inch Screw; (3).

Equipped with universal 1/4 inch and 3/8 inch screw, it is compatible with most photography equipment, such as strobe light, spotlight, reflector, softbox, etc. 3 Installation interface (Left+Right+Top) on the crossbar's tip is perfect to meet various shooting requirement. Safety Design with Stand &. Equipped with buffer spring in the tripod stand, which can reduce the impact of the sudden drop of the lighting equipment when adjusting the height, thereby protecting the lighting equipment.
Set with 3 universal roller. S, the light stand can be removed easily and stably. These wheels are set with a foot brake, making the light stand to fix on a certain position, more safe and reliable. Flexible Stand & Crossbar: The light stand can be adjusted from 50.3-82.6 inches/128-210 centimeters, and the crossbar length can be extended from 52.7-93.7 inches/134-238 centimeters. The crossbar can be rotated 90 degrees to be fully upright.
There's an adjustment dial set at the end of the boom arm, which can control the direction of the head of the boom arm. Heavy-Duty Collapsible Tripod Stand: The stand is made of stainless steel material, which ensures a longer service time and exceptional strength for heavy-duty work with max. Load capacity 88.1 pounds/40kg; corrosion-resistant and long-lasting. Come with 3 cable ties, they can be installed on the crossbar to clip the lighting equipment's cables, avoiding accidents caused by wires. Easy to Install & Store: This light stand kit is easy to disassemble and assemble. The tripod stand can be foldable, convenient for storing and carrying around. Sandbag included is to help this tripod kit keep in balance.
Note: This counter-weight sandbag is empty, you need to add weight by yourself. This item is 100% Brand New. We will reply you with 24 hours.
Please leave us 5 star feedback. We could resolve the problem, because we believe everything could be resolved through communication, THANK YOU! The item "Neewer Heavy Duty Light Stand with Casters and Pro Boom Arm, Max. Height 14.7ft" is in sale since Thursday, March 4, 2021.
This item is in the category "Cameras & Photo\Lighting & Studio\Light Stands & Booms". The seller is "emilyandlily" and is located in edison 08817.

This item can be shipped to United States.

  • Type: Light Stand
  • Model: 10098088
  • MPN: 10098088
  • Brand: NEEWER


Neewer Heavy Duty Light Stand with Casters and Pro Boom Arm, Max. Height 14.7ft    Neewer Heavy Duty Light Stand with Casters and Pro Boom Arm, Max. Height 14.7ft